Purpose of This Article/Document
Frequently prospective buyers of a
single family home have many questions regarding the septic system serving the dwelling: What does the existing septic system consist of? Is it working property? How long will it last? In order to help buyers obtain Information that addresses these concerns. We have put together this Fact Sheet to guide them in making informed decisions regarding the potential problems and costs associated with a property's septic system.
Overview of Septic Systems
The purpose of a home's subsurface
sewage disposal system (septic system) is to dispose of the water generated by the occupants in such a manner that the soils on the property can disperse it without causing an adverse effect on ground water and in turn on public health and the environment. To accomplish this
a septic system consists of the following elements:
- A sewer line that connects the home's plumbing to the septic tank;
- A septic tank that allows for the settling of soils and provides the initial
treatment of the septage. A properly functioning septic tank will reduce pollutant levels and produce an effluent of fairly uniform quality. This is accomplished by providing inlet and outlet baffles to reduce the velocity of liquid moving through the tank and to prevent solids from leaving the tank. Tanks installed since January 1991 now consist of two compartments in order to do a
more effective job of attaining the above objective;
- A distribution system that directs the flow of effluent from the septic tank
to the leaching system in such a manner to insure full utilization of the system. Most systems are "gravity" systems, meaning the flow runs through piping and distribution boxes without the assistance of any mechanical device, such as a pump or siphon;
- A leaching system, which disperses the sewage effluent into the surrounding natural soils. There are many types of leaching systems. The specific type utilized on a particular property is usually
dependent on the soil conditions which exist on the site. Most residential installations utilize stone-filled leaching trenches, but galleries, pits and beds have historically been used.
For a leaching system to function properly it must:
- Provide enough application area. The application area is the amount of
surface area of soil within the leaching system where sewage effluent is applied (referred to as "wetted" area). The amount of application area needed for a given house depends on the characteristics of the soils on the property and the daily flows (in gallons) generated from the house.
- Be surrounded by natural soil conditions which will be able to dissipate and disperse the discharge without becoming over saturated.
- Provide enough capacity to store effluent during periods of unusually heavy use or when rainfall or subsurface flooding reduces the ability of the system to disperse the liquid. Note: Curtain drains or ground water interceptor drains are sometimes installed upgrade of the leaching system to minimize high ground water conditions.
It is important to realize that, once a system has been installed, only one of the above factors can be controlled by
the homeowner. The homeowner can control how much water is actually being discharged to the system. Since each system has a set maximum capacity, it behooves the homeowner not to exceed that amount.
If a system starts to experiennce difficulties, what are some of the common symptoms?
|
